ECRON COSMO 1252421, Руководство пользователя

Страница: 59 / 66

59
EN
The remote control is provided with 2 batteries R6 (AA), 1.5 V each.
- Remove the cover from the battery compartment located
at the back of the remote control.
- Insert the batteries according to their polarity (following the
s and –) .
- Replace the battery compartment cover.
The remote control is used to switch the fan on and off
(Figure 1).
1. FAN SWITCH-ON To switch the fan on,
press button “0” and then release it. To switch
the fan off, press button “0” again and then
release it.
2. SPEED The fan speed can be adjusted to
the desired level: 1 - low speed, 2 - medium
speed or 3 - high speed. To do so, press the
corresponding buttons and then release
them.
3. LAMP SWITCH-ON To switch the lamp on,
press the button located at the top left and
then release it.
4. LAMP SWITCH-OFF To switch the lamp
off, press the button located at the top right
and then release it.
Precautions
- Be careful with the remote control: avoid bumps or falls.
- The batteries should not be exposed to excessive heat such
as sunlight, fire or similar.
- If the unit is not going to be used for a long period of time,
remove the batteries from their compartment.
INSTRUCTIONS FOR CONNECTION
• There are four coloured cables coming from the motor that
lead to the connection strip.
BROWN - fan phase cable
BLUE - neutral cable
YELLOW/GREEN - earthing cable
RED - phase cable feeding power to light
YELLOW /
GREEN
BLUE
BROWN
RED
EARTH
NEUTRAL (N)
PHASE
(MOTOR-LIGHT)
FAN WITH LIGHT
CONNECTION STRIP
Connect the cables from the roof to the connection strip.
Brown to phase, Blue to neutral, Red to the light installation
of your fan model and Yellow/Green to Earth.
Always connect the earth cable first (yellow/green).