ECRON COSMO 1252421, Руководство пользователя

Страница: 60 / 66

60
The remote control is provided with 2 batteries R6 (AA), 1.5 V each.
- Remove the cover from the battery compartment located
at the back of the remote control.
- Insert the batteries according to their polarity (following the
s and –) .
- Replace the battery compartment cover.
The remote control is used to switch the fan on and off
(Figure 1).
1. FAN SWITCH-ON To switch the fan on,
press button “0” and then release it. To switch
the fan off, press button “0” again and then
release it.
2. SPEED The fan speed can be adjusted to
the desired level: 1 - low speed, 2 - medium
speed or 3 - high speed. To do so, press the
corresponding buttons and then release
them.
3. LAMP SWITCH-ON To switch the lamp on,
press the button located at the top left and
then release it.
4. LAMP SWITCH-OFF To switch the lamp
off, press the button located at the top right
and then release it.
Precautions
- Be careful with the remote control: avoid bumps or falls.
- The batteries should not be exposed to excessive heat such
as sunlight, fire or similar.
- If the unit is not going to be used for a long period of time,
remove the batteries from their compartment.
INSTRUCTIONS FOR LAMP INSTALLATION
To ensure correct lamp system operation, read these instruc-
tions correctly and study the diagrams before starting work.
Follow the instructions that are applicable to the lamp system
installed in the model you have purchased.
PRECAUTION: To reduce the risk of electric shock, turn off
the main switch before installing.
• Fan supplied with two bulbs.
• Install two halogen bulbs with a power below 40 W (not
included) and fit the lampshade using the supplied
mounting screws.
• Do not over tighten the screws as the lampshade could
break.