52
INSTALLATION INSTRUCTIONS
•
WARNING:
To reduce the risk of personal injury, only use
the two steel screws (and self-locking washer) provided with
the fan to mount the external case.
•
WARNING:
To reduce the risk of personal injury, do not
bend the blade holders when cleaning the fan during
installation. Do not insert foreign objects between the blades.
•
WARNING:
Ensure that the fastening hook and the nut are
correctly positioned and that the screws in the beam are fully
tightened, before using the fan.
DO NOT MOUNT THE FAN ON A SUSPENDED CEILING,
MINERAL WOOL BOARDS OR PLASTERBOARD, ETC.
Choose a location for the fan where the blades are at a
minimum distance of 2.35m from the ground. Mount the
support plate on the ceiling, or the plate already in use. In
order to fasten the plate correctly, use two self-threading
screws, to fix the plate to the beam or joist. If the place you
have chosen does not have a suitable beam for fastening,
install a 5 x 10 cm base between the ceiling joists to support
the fan.
1.- Attach the plate with the two screws included with the fan.
2.- Attach the plate with the two screws included with the
fan.
2.- Hang the fan on the hook on the decorative cover,
through a hole in the light fixture.
3.- Make electrical connections.
(See connection instructions)
4.- Secure the light fixture in the middle to the decorative
cover with the four screws provided. Turn the light fixture in an
anti-clockwise direction if necessary, to ensure that it is
securely installed.
5.- Attach each blade to its holder using three screws per blade.
Then attach the holders to the fan using two screws per
holder.
6.- Attach the anchoring elements
Содержание COSMO 1252421
