ECP2050
44 / 64
6.5.3. Ethernet
Displays information about actual setting of ethernet.
IP
-IP address of the unit,
MASK
–
subnet mask,
GATE
– default gateway,
MAC
– unique hardware address.
6.5.4. User Text
User information about the unit. This information can be set only through PC. It serves for
user description of the unit, its placement etc.
6.5.5. Pump
In this submenu are displayed supplementary information about the pump run from unit start-
up.
REV. COUNT
- camshaft speed (number of piston cycles),
OPER. TIME
- operating time.
6.5.6. Parts
Displays information about replaced pump components. First item is operating time
(pumping) from last replacement and second item is number of revolutions (piston cycles) from last
replacement (speed is in thousands).
6.5.6.1. Seals
L.PUMPING
- left
working
head
seal,
R.PUMPING
- right
auxiliary
head
seal,
L.WASHING
- left washing head seal,
R.WASHING
-right washing head seal.
6.5.6.2. Check Valves
L INLET
– left inlet check valve,
R INLET
– right inlet check valve
, L OUTLET
– left outlet
check valve,
R OUTLET
– right outlet check valve.
6.5.6.3. Pistons
LEFT
- left piston,
RIGHT -
right piston.
6.6. Diagnostics
In each submenu is displayed diagnostic information about the unit.
6.6.1. Errors
On screen is displayed
ERROR
. Unit knows three types of errors
– simple error, operating
error and fatal error. When reporting simple error, pumping does not stop, error is announced by
three beeps and LED ERR still shines red. When reporting operating error, pumping stops and
after pressing PUMP it starts running again, if the fault source has been corrected. When reporting
fatal error, pumping stops and its start is blocked. Reset can be done by turning the unit off and on,
after elimination of the fatal error.
If an error occurs, display shows symbol
E
with a
number of errors.
When entering
Menu/Diagnostics/Errors
a
number is displayed (
ERROR NO:
) and a
description of actually displayed error, total
number of errors (
TOTAL:
) and eventually arrows
suggesting possibility of listing, when there is