Ecom ECD2600, Руководство пользователя

Страница: 27 / 47

ECD2800 / ECD2600
27 / 47
Name Description Nominal [V] Min [V] Max [V]
VAP Positive Analog power supply +11.60 +11.00 +12.00
VAN Negative Analog power supply -11.80 -11.20 -12.20
VCC Positive Digital power supply +5.10 +4.90 +5.30
VDD Positive Low Digital power supply +3.30 +3.20 +3.40
VLP Positive Low Analog power supply +4.80 +4.70 +4.90
VLN Negative Low Analog power supply -0.40 +0.35 -0.45
6.6.3.2. Lamps
For control of main supply voltage and current values of D2 (deuterium lamp) and
W (tungsten lamp)
Name Description Nominal Min Max
VHT D2 Heating voltage (D2 OFF) 0.00V
D2 Heating voltage (D2 ON) 1.55 V 1.42 V 1.68 V
D2 Heating voltage (D2 preheating) 3.48 V 3.22 V 3.72 V
VAD D2 Anode voltage (D2 OFF) 29.50 V
D2 Anode voltage (D2 ON) 68.00 V 62.00 V 78.00 V
D2 Anode voltage (D2 IGNITION) 500.00 V
IAD D2 Anode current (D2 OFF) 0.000 A
D2 Anode current (D2 ON) 0.270 A 0.260 A 0.280 A
VBL W voltage (W OFF) 0.00 V
W voltage (W ON) 11.00 V 10.50 V 11.80 V
IBL W current (W OFF) 0.000 A
W current (W ON) 0.812 A 0.780 A 0.840 A
VFA SMALL FAN voltage (both lamps OFF) 0.00 V
SMALL FAN voltage (any lamp ON) 18.80 V 18.00 V 19.60 V
IFA SMALL FAN current (both lamps OFF) 0.000 A
SMALL FAN current (any lamp ON) 0.025 A 0.020 A 0.030 A
6.6.4. Cooling
Shows temperature of illuminator
TEMP
, rotation speed of fans
FAN1
and
FAN2 (rpm)
and
their voltage (
V
) and chosen mode of illuminator temperature regulation
MODE
. Stability of zero
line (drift) is dependent on setting of temperature regulation.
6.6.5. Interface
Shows analogue and digital interface status of
IO INTERFACE:
Voltage on analogue input
AIN (V),
status of digital inputs
DIN1
and
DIN2
and digital
output mode
DOUT
set according to chapter Menu/IO Config/Interface /Digital output switch.
6.6.6. Cell Temp
Inactive.
6.6.7. Opti Calib
Here you can find data from optical unit calibration, where line 486 shows control point at
486 nm and last item R shows real wavelength, where was found maximum of this hydrogen