Stromversorgung:
4 x Batterien (AA); Alkalibatterien oder optional Akkus
Warnsymbol bei erschöpfter
Batteriekapazität
Ja
Serielle Anschlüsse
Ja, ASCII
CE - EMV
EN50082-1 : 1992 und EN55022: 1994 Klasse B
Sicherheit
CSAC22.2 No. 1010,1: 1992
Tabelle 10: Gleichspannungsmessung / Gleichspannungsgeber
Bereich
Genauigkeit
(% des Messwerts ± digit)
Messen: Isoliert (Obere Anzeige)
0,000 V- 30,000 V
0,015 % ± 2
Messen: Nicht isoliert (Untere
Anzeige)
0,000 V - 20,000 V
0,015 % ± 2
Geber
0,000 V - 20,000 V
0,015 % ± 2
Der maximale Ausgangsstrom im Spannungsmessbereich liegt bei 1 mA bei einer Ausgangs-
impedanz von ≤ 1 Ohm.
Tabelle 11: Gleichstrommessung / Milliampere Geber
Bereich
Genauigkeit
(% des Messwerts ± digit)
Messen: Isoliert (Obere Anzeige)
0,000 mA - 24,000 mA
0,015% ± 2
Messen: Nicht isoliert (Untere
Anzeige)
0,000 mA - 24,000 mA
0,015% ± 2
Geber
0,000 mA - 24,000 mA
0,015% ± 2
Maximale Last beim geben im Milliamperebereich ist 1000 Ohm.
Spannungseingangsbereich im Simulationsmodus 5 V bis 30 V
Tabelle 12: Frequenzmessung / Frequenz Geber
Bereich
Genauigkeit
(% des Messwerts ± digit)
Messen
2,0 CPM - 600,0 CPM
0,05 % ± 1
1,0 -1000,0 Hz
0,05 % ± 1
1,00 -10,00 kHz
0,05 % ± 1
Geben
2,0 CPM - 600,0 CPM
0,05 % ± 1
1,0 - 1000,0 Hz
0,05 % ± 1
1,00 -10,00 kHz
0,125% ± 1
Eingangsspannungsamplitude im Frequenzmodus 1 V bis 20 V, nur Rechteckspannung mit
Nulldurchgang, Ausgangsamplitude einstellbar zwischen 1 V und 20 V Rechteckschwingung
mit einem Tastverhältnis von 50 % Bei der Ausgabe einer Frequenz existiert ein leicht
negativer Offset von etwa -0,1 V, damit der Nullpunkt sicher durchschritten wird.
43