118
Tableau 6: Commandes du calibrateur
Commande
Description
CAL_START
Met le calibrateur en mode de calibrage
CJC_STATE
Active ou désactive la CJC
CJC_STATE?
Renvoie l’état de la CJC
CPRT_COEFA
Règle le coefficient A du RTD personnalisé
CPRT_COEFA?
Renvoie le coefficient A du RTD personnalisé
CPRT_COEFB
Règle le coefficient B du RTD personnalisé
CPRT_COEFB?
Renvoie le coefficient B du RTD personnalisé
CPRT_COEFC
Règle le coefficient C du RTD personnalisé
CPRT_COEFC?
Renvoie le coefficient C du RTD personnalisé
CPRT_MIN_T
Règle la température minimale du RTD personnalisé
CPRT_MIN_T?
Renvoie la température minimale du RTD personnalisé
CPRT_MAX_T
Règle la température maximale du RTD personnalisé
CPRT_MAX_T?
Renvoie la température maximale du RTD personnalisé
CPRT_RO
Règle la résistance R0 du RTD personnalisé
CPRT_RO?
Renvoie la résistance R0 du RTD personnalisé
FAULT?
Renvoie le code d’erreur d’une erreur survenue
FREQ_LEVEL
Règle l’amplitude de fréquence ou d’impulsion
FREQ_LEVEL?
Renvoie l’amplitude de fréquence ou d’impulsion
FREQ_TYPE
Règle la génération de fréquence sur continue (fréquence) ou impulsion
FREQ_TYPE?
Renvoie le type de génération de fréquence, continu ou impulsion
FREQ_UNIT
Règle l’unité pour la fréquence et les impulsions
FREQ_UNIT?
Renvoie l’unité pour la fréquence et les impulsions
FUNC?
Renvoie le mode actuel des affichages supérieur et inférieur
LOCAL
Renvoie l‘utilisateur au fonctionnement manuel du calibrateur
LOCKOUT
Verrouille le clavier du calibrateur, et n’autorise que le fonctionnement à
distance
LOWER_MEAS
Règle le mode de mesure sur l’affichage inférieur.
L_PRES_UNIT
Règle l’unité de pression sur l’affichage inférieur
OUT
Règle la sortie du calibrateur
OUT?
Renvoie la sortie du calibrateur
PRES?
Renvoie le modèle et le numéro de série du module de pression connecté
PRES_UNIT?
Renvoie l’unité de pression pour les affichages supérieur et inférieur
PULSE_CNT
Règle le nombre d’impulsions du train d’impulsions
PULSE_CNT?
Renvoie le nombre d’impulsions du train d’impulsions