Ecolab 141277, Руководство по эксплуатации

Страница: 132 / 208

The procedure for dismantling is as follows:
DANGER!
During dismantling, it is imperative to ensure that appropriate personal
protective equipment (PPE) is used!
n Make sure you have sufficient space before starting all tasks.
n Drain operating fluids and consumables and remove the remaining processing
materials; dispose of them in an environmentally-friendly way.
n
Then clean assemblies and components correctly, and dismantle prevailing local
health and safety and environmental protection regulations into consideration.
n Always handle open, sharp-edged components carefully.
Suitable protective gloves must be worn.
n Keep the workplace tidy and clean.
DANGER!
Loosely stacked components and tools (or leaving components and tools
lying around) can cause accidents.
n Depressurise the system and pressure line.
n Disassemble the components professionally.
n Observe the heavy weight of some components.
If required, use lifting gear.
n
Support the components to avoid them falling or tipping.
NOTICE!
If you are uncertain, it is imperative to contact the manufacturer.
13.4 Disposal and environmental protection
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Incorrect disposal can be a threat to the environment.
– Electrical scrap, electronic components, lubricants and other operating
fluids must be disposed of by approved waste disposal service
providers
– If in doubt, contact your local authority, or an approved waste disposal
service provider, for information on correct disposal.
All components are to be disposed of in accordance with prevailing local
environmental regulations. Dispose of them accordingly, depending on the
condition, existing regulations and with due regard for current requirements
and criteria.
Prior to disposal, all parts which are in contact with media must be
decontaminated.
Oils, solvents, detergents and contaminated cleaning tools
(brushes, cloths, etc.) must be disposed of in compliance with local
requirements, in accordance with the prevailing waste code and with due
attention to the notes contained in the manufacturers' safety data sheets.
Decommissioning, dismantling, disposal
62 417101964 Rev. 4-04.2019