Ecolab 141277, Руководство по эксплуатации

Страница: 95 / 208

6 Installation
Personnel: n Specialist
n Qualified electrician
n Mechanic
n
Service personnel
Read the User Manual for the EMP II E60 diaphragm metering pump,
Article No. 417101795 Ä Chapter 3 ‘Scope of supply’ on page 20.
WARNING!
Installation and operation of the device is only permissible if the drinking
water supply is secured in accordance with DIN EN 1717 with a BA-type
system separator.
Ä
Chapter 6.2 ‘Installation diagram - schematic
diagram’ on page 26 .
Refer to the schematic diagram during assembly:
Ä
Chapter 6.2 ‘Installation diagram - schematic diagram’ on page 26
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools during assembly,
maintenance or troubleshooting. Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
– All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the
applicable local regulations.
– Safety regulations and prescribed protective clothing when handling
chemicals should be followed. Attention must be paid to the information
included on the product data sheet for the metering medium used.
– Prior to installation, maintenance and repair works the feeding of the
dosing medium should be disconnected and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance
and repairs.
Installation
25 417101964 Rev. 4-04.2019