DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
– All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the
applicable local regulations.
– Safety regulations and prescribed protective clothing when handling
chemicals should be followed. Attention must be paid to the information
included on the product data sheet for the metering medium used.
– Prior to installation, maintenance and repair works the feeding of the
dosing medium should be disconnected and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance
and repairs.
2.7
Lifetime
In relation to the dependence of the adequate maintenance protocols the life time
is 2 years (visual and functional testing, replacement of wearing parts, etc.)
Afterwards a revision is necessary, in some cases also a subsequent general overhaul
by the manufacturer.
2.8
Personnel requirements
Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If inadequately qualified personnel work on the system or are in the
hazardous area, hazards may arise that can cause serious injuries and
significant material damage.
– All work must be carried out by qualified personnel only!
– Keep unqualified personnel away from hazard areas.
NOTICE!
Only those individuals who can be expected to perform their work reliably
are authorised as personnel. Individuals whose reactions are impaired, e.g.
by drugs, alcohol, medicines, are not authorised. When selecting
personnel, the valid age and occupation-specific regulations must be
observed.
Manufacturer
Certain work may only be carried out by specialist staff of the manufacturer or by staff
authorised or specially trained by the manufacturer. Other people or personnel are not
authorised to carry out this work.
To carry out the work required, please contact our customer service.
Safety
14
417101964 Rev. 4-04.2019
Содержание 141277
