Eco-ideal eco 4, Инструкция по установке, использованию и техническому обслуживанию

Страница: 7 / 24

7
Assembly Instructions
F
LUE
C
OLLAR AND
B
LANKING
P
LATE
Wind the eight M6 studs supplied into the fixing
holes in the flue collar and blanking plate until finger
tight.
Place a flue outlet gasket in position on the top plate
of the stove and lower the flue collar or blanking
plate (as required) on to the stove top, taking care
to line up the studs with the fixing holes.
Secure in place using the M6 nuts and washers. Slide
the remaining gasket on to the studs of the flue
collar or blanking plate and secure in place on the
back plate. Unless the optional flue damper is being
fitted, blank off the damper handle holes in the flue
collar using the two M8 coach bolts.
Fire Bricks
The Fire Bricks, in this appliance, are factory fitted.
The following set of photos show the removal
sequence that you will need to employ when
servicing your Eco Ideal Stove.
Side Bricks
Remove all the Riddling Bars, Cam Bar and Catch
Bar.
Slide out both Side Plates.
Slide the base of the Side Brick towards the centre
of the stove and remove.