34
X
X
X
X
X
3. Configuring the week profile
The times for automatic switching between the comfort temperature and the lowering temperature can be programmed
differently for each day of the week, and can thus be adapted to suit your personal lifestyle.
• Briefly press the ‘PROG’ button once.
• The following display appears:
Figure 25
• ‘H 0’ refers to the FHZ1000 itself, while ‘H 1’, ‘H 2’, etc., refer to the room controllers/heating controllers.
• Use the scroller to select the day for which you want to change the time program. You can either select each day of
the week individually or program a combination of days in one block for:
a) weekdays (Mon-Fri)
b) the weekend (Sat-Sun)
c) all days (Mon-Sun)
• After selecting the weekday/days, confirm your selection by pressing the ‘PROG’ button.
• The display for the first comfort temperature time appears:
Figure 26
• Use the scroller to select the time at which the comfort temperature should start. The curve progression on the lower
part of the display follows your settings.
• Briefly press the ‘PROG’ button to confirm the starting time.
• The first lowering time appears on the display:
Figure 27
• Use the scroller to select the time at which the temperature should begin to reduce to the lowering temperature. The
curve progression on the lower part of the display follows your settings.
• Briefly press the ‘PROG’ button to confirm the starting time.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
