30
• Normal operating mode
The following information is displayed in the normal operating mode of the FHZ1000:
-
Time
-
Date
-
Current target temperature
-
Operating mode
-
Temperature profile (only if the control centre itself controls a room/valve operating mechanism)
In the normal operating mode all settings can be made for the room in which the control centre is installed.
Ö
Please note:
The wireless transfer of data with the other system components is only possible in the normal operating mode.
For this reason the FHZ1000 automatically returns from the menus or programming to this mode 2 minutes
after the last operation. Settings that have not been saved (using the ‘MAKRO’ button) are deleted/
disregarded.
• Menu level
The menu level offers access to the submenus for the purpose of parameter programming. You can select the
individual heating controls (1 to 15), the individual remote switches (1 to 15) and the special functions by turning the
scroller.
• Programming level
The device to be handled or the special function in question has already been selected before the programming level
is accessed. Here the parameters are entered.
X
X
X
X
X
3. Setting the display
’
s contrast
The display contrast can be optimised for different lighting conditions.
To change the display contrast, proceed as follows:
• Briefly press the ‘
x
’ button once.
• Select ‘Sonderfkt.’ (special function) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Konfig.’ (configuration) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Kontrast’ (contrast) using the scroller.
• Briefly press the ‘
x
’ button once.
• The display contrast can now be set to a value between 0 and 8 using the scroller.
• To save, briefly press the ‘MAKRO’ button once.
• The display briefly shows ‘gespeich.’ (saved).
• Press the ‘
w
’ button four times to return to the normal operating mode.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
