ECM Manufacture Synchronika, Руководство пользователя

Страница: 32 / 69

Bedienungsanleitung / User Manual/ Handleiding/ Руководство по эксплуатации SYNCHRONIKA
ENGLISH
31
Caution!
If the group lever is not moved into the lower position properly, hot water and grounds will squirt out
of the brew group while taking out the filter holder. This may cause injuries.
x
Only freshly ground coffee allows for an optimal coffee result. Therefore, use a professional
coffee grinder. In our assortment you will find several professional and compact coffee grinders.
x
We recommend to use a stainless steel tamper with a diameter of 58 mm for optimum tamping.
6.5 Dispensing of hot water
To dispense hot water the steam boiler has to be switched on. Press the right switch behind the drip tray in position
‘I’ . Please wait until the desired steam temperature has been reached.
Place a suitable container (with heat-insulated grip) underneath the hot water wand. Now you can dispense hot
water (e.g. for tea). When dispensing large amounts of water, it is advisable to turn the machine off so that no cold
water is pumped anymore.
1
After having dispensed hot water, turn the machine back on. The boiler is automatically refilled with fresh water.
When the machine is switched off, more hot water can be dispensed.
However, one does not necessarily have to switch off the machine for dispensing hot water.
Risk of injury
Always keep the hot water nozzle underneath the surface of the water while heating in order to
avoid splashing.
6.6 Dispensing of steam
The SYNCHRONIKA makes it possible to generate large amounts of steam in order to heat or froth beverages, e. g.
milk or punch. It is a professional and compact espresso coffee machine with an enormous steam volume. Therefore,
within a few seconds, you can prepare milk froth. Please pay attention to the instructions below. Do not bring the
milk to a boil, otherwise frothing milk will not be possible.
1
To dispense steam the steam boiler has to be switched on. Press the right switch behind the drip tray in position
‘I’. Please wait until the desired steam temperature has been reached.
2 Important: In order to get the best results when frothing milk, open the steam lever for approx. 5. seconds to
release the condensation water in the pipe. This also prevents milk from being sucked into the boiler.
3 Immerse the steam nozzle (at the end of the steam dispenser) into the liquid.
4 Re-open the steam handle / steam lever.
5 Heat and/or froth the liquid.
6 After frothing or heating, release some steam to keep the holes of the steam nozzle clean.
Risk of injury
Always keep the steam nozzle underneath the surface of the liquid while heating or frothing in order
to avoid splashing.
Avoid skin contact with the steam dispenser while cleaning!
Important
After every application, clean the steam nozzle and the steam dispenser with a non-abrasive, damp
cloth; This removes possible liquid residues.
7 CLEANING AND MAINTENANCE
A regular and accurate care is very important for the performance, the longevity and the safety of your machine.
Caution!
Always switch off the machine (power switch in lower position), disconnect the power cord and let
the machine cool down to room temperature (for at least 40 minutes) before cleaning.