ECM Manufacture Synchronika, Руководство пользователя

Страница: 27 / 69

Bedienungsanleitung / User Manual/ Handleiding/ Руководство по эксплуатации SYNCHRONIKA
ENGLISH
26
Machine in use with a water tank
When using the machine with a water tank, please turn the valve towards the water supply adapter (image 3).
Additionally, place the switch behind the drip
tray into position “0” (i mage 4).
Image 3 Image 4
Valve in position for operating
machine with water tank
Place switch into position “0“ when
operating machine with water tank
Important
Please make sure that only your authorized ECM-dealer connects the machine to the water supply
and installs the pressure regulator and shut off valve.
To avoid calcification of the machine a water-softener is recommended.
The machine may only be descaled by your specialised dealer because a partial disassembly of the
boiler and the tubing may be necessary to prevent the system from being blocked by lime residues.
A late descaling can cause substantial damage to the machine.
The residual water is disposed off periodically by emptying out the water drip tray. Alternatively, you can hook the
machine directly up to a water drainage. Please proceed as follows: Remove the sealing screw in the drip tray and
fasten the drainage container to the rim below the drip tray. Connect a suitable hose (not included with delivery) to
the drainage container (connection Ø 14 mm) and to an already installed drainage syphon. Slightly incline the hose
so that the residual water can drain completely.
Image5: Machine bottom
4.4 Manual adjustment of the brewing pressure
The brewing pressure of the machine can be adjusted manually, without opening the machine, through an adjusting
screw (see image 5 chapter 4.3) at the bottom of the machine. This adjustment must be carried out by expert
specialists.
Adjustment screw brewing pressure
Drainage container