ECM Manufacture Synchronika, Руководство пользователя

Страница: 29 / 69

Bedienungsanleitung / User Manual/ Handleiding/ Руководство по эксплуатации SYNCHRONIKA
ENGLISH
28
4 Turn the machine on by placing the metal switch in the upper position. The green control lamp and the PID
display will come on and a pump noise will be heard. The coffee boiler and the steam/ hot water boiler are now
filled with water simultaneously.
As soon as water is released through the brew group, position the brew lever back downward. If there is still a
pump noise, the filling of the steam/ hot water boiler is still being completed.
5 As soon as both boilers are filled with water, the pump will become quiet. The PID display and the orange control
lamp will illuminate. Both boilers are now being heated in succession whereby the coffee boiler has priority.
6 The PID display will show the current temperatures of both boilers alternately (see chapter 3.3).
The machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal temperature
of 93°C (factory setting). The machine is ready for steam/ hot water dispension as soon as the PID display
indicates the pre-set nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a
value of about 1.0-1.5 bars.
7 Manual boiler venting is not necessary because the Synchronika contains a professional anti-vacuum valve, which
automatically vents the boiler during the heat-up phase. This venting process is done by way of the brew group,
directly into the drip tray. Caution, steam forms!
8 The machine is now ready for use.
Please consider that the procedure described in the steps above is the same if the steam/ hot water boiler is
deactivated: also in this case the steam/ hot water boiler will be filled and the PID display indicates the temperature
in the steam/ hot water boiler. However, the orange control lamp remains off and the steam/ hot water boiler will
not be heated.
The SYNCHRONIKA has a fuse to prevent the machine from overfilling.
It is possible that the machine does not heat up when using it for the first time or when dispensing
large quantities of water through the hot water valve. In this case, please switch the machine off and
on again.
Filter holder, drip tray, drip grid and water tank are not suitable for the dish washer.
6 USE OF THE MACHINE
6.1 Preparation of the machine
The switched off machine is to be placed into operation as follows:
Machine in use with water tank
1 Fill the water tank, if necessary.
2 Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray in
position ‘0’).
To use the steam function, press the right switch behind the drip tray in position ‘I’.
3 Please wait until the desired coffee-, i.e. steam temperature, has been reached (value indicated on the PID-
display). The machine is ready for steam/ hot water dispension as soon as the PID display indicates the pre-set
nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a value of about
1.0-1.5 bars.
4 In general, the machine will be heated up in about 15 minutes, depending on the ambient temperature.
5 The machine is now ready for use.
Machine in use with direct water connection
1 Please make sure that there is always water pressure in the water connection line (indicated on the pump
pressure gauge).
2 Now turn the machine on (the metal switch in the upper position and the left switch behind the drip tray in
position ‘I’).
To use the steam function, press the rig ht switch behind the drip tray in position ‘I’ .
3 Please wait until the desired coffee-, i.e. steam temperature, has been reached (value indicated on the PID-
display). The machine is ready for steam/ hot water dispension as soon as the PID display indicates the pre-set
nominal temperature of 123°C (factory setting) or the boiler pressure gauge indicates a value of about
1.0-1.5 bars.
4 In general, the machine will be heated up in about 15 minutes, depending on the ambient temperature.
5 The machine is now ready to use.