Eclipse PE300BU, Руководство оператора

Страница: 14 / 44

14
Onboard Battery Charger
To charge the batteries, first drive the machine to a flat,
dry, well-ventilated area then turn the machine off. If
using lead acid batteries, check the water level in all the
battery cells (see Battery Maintenance section). If the
level is low, add just enough distilled water to cover the
plates. ** DO NOT OVERFILL! **
Then plug the charger cord into a wall socket. The
battery charger will initialize and then soft start the
charging cycle.
WARNING! Batteries emit hydrogen gas when
charging. Explosion or fire can result. Keep sparks
and open flame away when charging.
CAUTION! When servicing machine, wear protective
gloves and goggles when handling batteries or battery
cables. Avoid contact with battery acid.
Battery Charger Controls
1. Three-digit d symbol (1), to view A=charging
current, U=battery voltage, h=charging time,
C=charging ampere-hours (AH), E=energy used to
charge (KWh)
2. Button for the Selection of the display mode (2): A, U,
h, C, E. After 10 seconds the display returns to the
display of charging current.
3. Red control indicator (3): when it is on, the charging
cycle has started.
4. Yellow control indicator (4): when it is on, the final
phase of the charging cycle has started.
5. Green control indicator (5): when it is on, the
charging cycle has finished.
Once the charge cycle is complete, the charger will
remain active in a trickle charge mode to maintain the
charge on the batteries until the charger is unplugged
from the wall socket.