Eclipse PE300BU, Руководство оператора

Страница: 11 / 44

11
Connecting the Batteries
1. Place the batteries in the machine oriented as
shown in diagram.
2. Connect the batteries as shown in the battery
connection diagram.
3. DANGER! Incorrect connection of batteries can
cause explosion and/or serious injury.
4. Double check battery connections.
5. Connect the battery pack plug to the machine.
Installing the Skirt
1. Lift the deck upward about 90 degrees by pulling up
on the front of the deck. At this point, the tilt latch
will hold the deck in the pad change position. (Ref.
Machine Operation - Installing/Changing Burnishing
Pad)
2. Remove steel skirt from bubble wrap packing and on
the outside of the skirt, loosen the 1/4” hex bolt with
jam.
3. Slide the skirt onto the burnish head aligning the
slots in the skirt with the tabs on the deck. Make
sure the 1/4” bolt is at the back of the shroud.
4. Tighten the 1/4” bolt until the skirt is snug around the
deck but also floats up and down freely.
5. Tighten jam nut and lower deck to burnish position.
(Ref. Machine Operation: Installing/Changing
Burnishing Pad)