Eclipse PE300BU, Руководство оператора

Страница: 10 / 44

10
Unpacking the Machine
The machine is shipped boxed on a wooden pallet. To
unpack machine:
1. Cut and remove bands holding the box to the pallet.
2. Remove staples attaching the box to the platform at
the bottom edge of the box.
3. With two people, one at either end of the box, lift box
straight up and off machine.
4. Remove loose accessories from the top of machine.
5. Cut and remove bands securing the machine to the
pallet.
6. Lower the attached ramp
7. If the machine has batteries then remove the
battery cover and plug the battery pack plug into the
machine, turn on the key, drive the machine down
the ramp off the pallet. If the machine does not have
batteries, pull the machine down the ramp and off the
pallet. See the “Connecting the Batteries” section of
the manual.
8. Carefully back the machine off of the pallet.
Machine Storage
1. Machine should be stored in a dry environment.
2. Store machine away from objects that may fall and
damage it.
3. Never store burnisher near an open flame or heat
producing device.
4. Make sure burnisher is cleaned properly by wiping
machine down with damp cloth before storing.
CAUTION! NEVER PRESSURE WASH MACHINE!
5. Disconnect batteries before storage.
Repacking the Machine
Refer to Unpacking section on page 8 and repack
machine using original packing materials and container.
Transporting the Machine
When shipping the machine, make sure the batteries
are disconnected and the machine is secured in the
transporting vehicle.
Machine Preparation