Instruction Manual MM850481 ed. 03a
39
x
You can set 3 rows of personal data of the selected tag by pressing [
ID TAG
] (F1). In this case the following page will be
displayed:
ID TAG
R1 Plant 1
R2 Boiler 1
R3 Customer 1
ESCAPE
–
x
Select the row you wan to modify and press [
ENTER
].
x
Type in your text or edit the current one.
x
At the end press [
ESCAPE
] to return.
8.3 Delete
memory
If you had pressed the [
ENTER
] key with the cursor on the “DELETE MEMORY” option, the analyzer will display the following
message:
!! ATTENTION !! The memory will be deleted when you press [DELETE]
If you press the [
DELETE
] key (F1), The analysis data will be deleted.
8.4 Recall
memory
When you have stored the analysis data, you can recall the measured values by pressing the [
MENU
] key. The following
page will be displayed:
RECALL MEMORY
TAG SELECTION
SELECT MEMORY
MODE
ESCAPE
–
VIEW MEM
N
OTE
: B
EFORE RECALLING THE MEMORY YOU MUST SELECT THE
T
AG IF IT IS DIFFERENT FROM THE CURRENT ONE DIPLAYED SELECT
THE READING
M
ODE
: S
INGLE OR AVERAGE AND SELECT THE STORED DATA
.
Press [
VIS.MEM
] (F1) to visualize the analysis data: the selected memory data or the average values of the selected Tag.
Press [
] (F2) to print the report for the displayed data.
To change the recalling mode follow the procedure below:
Use the [
S
] and [
T
] keys to move the cursor symbol to “MODE” option.
Press the [
ENTER
] key to select the option.
Use the [
S
] and [
T
] keys to move the cursor symbol to “Single” or “Average” mode.
Press the [
ENTER
] key to select the option.
Press
[
ESCAPE
] (F1) to return to the previous menu without save the selection.
To change the memory date follow the procedure below:
Use the [
S
] and [
T
] keys to move the cursor symbol to “MEMORY DATE” option.
Press the [
ENTER
] key to select the option.
Use the [
W
] and [
X
] keys to display the date/time for all current Tag memory.
