EW28650 User’s Manual
rev. 3/14
EW28650: In-wall Wireless Access Point
30
3-3-4
SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network
Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or
consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration
screen.
Figure 20 SNMP Setting Screen
Item
Default
Description
SNMP
Disable
Disables or enables the SNMP management.
SNMP Port 161
If SNMP is enabled, this will allow the input of a specific SNMP port
number via NAT. The allowed SNMP port numbers are 161 (default),
16100-16199 and trap port numbers are 162 (default), 16200-16299.
This port setting is useful for remote control via NAT network.
Trap Port 162
Configuration
Community
Name
Public/Private
Every unit with SNMP enabled must be configured to recognize one or
more community names up to 20 characters. The default setting for
the community of entry is “Public.”
NMS
Address
ANY
The address of the NMS. The default settings for the NMS Networking
are “ANY.”
Privileges Read
Choose “Read”, “Write”, “Trap Recipients” and “All” for different
privileges. The defaults are all “read.”
Status
Valid/Invalid
Chosen “Valid” or “Invalid”. The default setting of entry is “Invalid.”
