EW28650 User’s Manual
rev. 3/14
EW28650: In-wall Wireless Access Point
25
Item
Default
Description
Administrator
Setting
Username
admin
The username can consist of up to 20 alphanumeric
characters and is case-sensitive.
Password
admin
The password can consist of up to 20 alphanumeric
characters and is case-sensitive.
Date/Time
Date (Year/Month/Day)
System Date
The system date of the In-wall Access Point. The valid
setting of year is from 2010 to 2035.
Time (Hour:Minute:Second) System Time
The system time of the In-wall Access Point.
-
Click “Get from my Computer”
button to correct the
system date and time.
-
Click “Get from NTP server”
button to correct the
system date and time.
NTP Setting
Disable
Enables or disables NTP (Network Time Protocol)
Time Server. Network Time Protocol can be utilized to
synchronize the time on devices across a network. A
NTP Time Server is utilized to obtain the correct time
from a time source and adjust the local time.
Server IP/Domain Name
Empty
Enter the IP address/domain name of NTP server. The
maximum length allowed is 100 characters.
Time Zone
GMT-12:00
Select the appropriate time zone for your location.
Update Time
0 hours
Enter the number of hours for update time.
Daylight Saving Time
Disable
Enables or disables Daylight Saving Time (DST).
Month/Day
Set the Daylight Saving Time (DST) on the In-wall
Access Point. Adjust the begin time and end time.
LED Setting
Disable
Enable or Disable Device LED lighting.
Secure administrator IP
Addresses
Any
Options: Any and Specify. Administrator can specify 5
IP addresses or a range to allow remote control access
from network.
Allow remote user to ping
the device
Enable
This function allows remote user to ping the In-wall
Access Point through the Internet. Ping is normally
used to test the physical connection between two
devices, to ensure that everything is working correctly.
