Eclipse wifi EW28650, Руководство пользователя

Страница: 7 / 34

EW28650 User’s Manual
rev. 3/14
EW28650: In-wall Wireless Access Point 7
LEDs Indication
LED State Description
PWR Off The In-wall Access Point not receiving electrical power.
Green The In-wall Access Point receiving electrical power.
SYS Off The In-wall Access Point status is defective.
Green The In-wall Access Point status is complete.
Green
(Blinking)
During firmware upgrades, the system’s LED will blink.
LINK / WAN Off Port has not established any network connection.
Yellow A port has established a valid 10/100Mbps network connection.
Yellow
(Blinking)
10/100Mbps traffic is traversing the port.
LAN Off Port has not established any network connection.
Green A port has established a valid 10/100Mbps network connection.
Green
(Blinking)
10/100Mbps traffic is traversing the port.
WLAN Off The wireless is not ready.
Green The In-wall Access Point has established a valid wireless connection.
Green
(Blinking)
The wireless connection is active.
1-4-2 Rear Panel
The rear panel of the In-wall Access Point
Figure 4 In-wall Access Point Rear Panel
10. RJ-45 Ethernet Connector (802.3af PoE)
11. RJ-45 Transparent