EW28650 User’s Manual
rev. 3/14
EW28650: In-wall Wireless Access Point
15
3 Configuring the In-wall Access Point
Step 1:
Start your browser, and then enter the factory default IP address
192.168.10.1
in your
browser’s (URL) location box. Press
Enter
.
Figure 5 Web Browser (URL) Location Field (Factory Default)
Step 2:
The In-wall Access Point configuration Tools menu will appear. In the Username and Password
field, type the factory default user name
admin
and password
admin
and click
Submit
.
Figure 6 Configuration Tools Menu
Note:
This Web Configuration Utility is best viewed with IE
6.0 or Firefox 3.5 or higher versions.
Username and Password can consist of up to 20
alphanumeric characters (case sensitive).
If for some reason your password is lost or you cannot gain access to the In-wall Access Point
Configuration Program, please press the reset button to load the device to manufacturer defaults.
If the In-wall Access Point doesn’t send any packets within 5 minutes (default), the In-wall Access
Point will logout automatically.
Proxy needs to set disable first when administrator accesses admin User Interface
