![background image](http://html1.mh-extra.com/html/eclipse-combustion/vortometric-v2-00/vortometric-v2-00_installation-manual_533959025.webp)
In this chapter you will find instructions on how to adjust a system
and how to start and stop a system.
Danger:
Do not bypass any safety features. You can cause fires
and explosions.
Obey the safety precautions in the Safety chapter.
Read all of this chapter before starting your system.
If you are adjusting the burner system for the first time, then you
must follow these steps:
1. Reset the system
2. Set combustion air pressure drop
3. Verify the air settings
4. Ignite the pilot
5. Ignite the burner
6. Set low fire fuel flow
7. Set high fire fuel flow
8. Verify the settings
Close the automatic gas valves and the gas cocks.
A
DJUSTMENT
PROCEDURE
Adjustment, Start & Stop
4-1
I
NTRODUCTION
Step 1:
Reset the system
4
Eclipse Vortometric Burner v2.00, Installation Guide 248, 4/10/07