ECKELMANN AL 300 S, Руководство по эксплуатации

Страница: 37 / 61

Operation of AL 300
32
Version 3-1 05. Dezember 2019
6.3 Remote operation/parameter setting of a E*LDS component
The LC display contains 4 lines of 20 characters. If a menu or screen contains more than 4 lines, the cursor
keys can be used to scroll through the remaining lines.
Main menu
4 Messages
↑
5 Remote control
6 Store computer
↓
Entry block must first be deactivated before parameters can be set.
In the Main Menu of the AL 300 Operator Terminal, open submenu
5 Remote Operation
. This displays the fol­
lowing screen:
REMOTE CONTROL Kn.nnn
Node Name
↑
Item ID XXXXX
↓
The E*LDS component wanted required can be selected using the cursor keys (
↑
) and (
↓
) or by entering its CAN
bus address (node No.
nnn
) with the numeric keys. Press the ENTER key to open the E*LDS component selected.
The main menu of the required E*LDS component is then displayed (here case controller UA 400):
REFR. PT. Pos: XXXXX
1 Actual Values
↑
2 Setpoints
3 Clock
4 Messages
5 Archive
6 Configuration
↓