16
• Press ON for 3 seconds. Default setting is 100%. Adjust the max. light
level to the brightness level desired by clicking ON to increase and OFF to
decrease in 2% increments.
• To continue with configuration, press ON for 3 seconds, the light will
resume blinking nine times. To exit Smart Click press OFF for 5 seconds.
Minimum Dimming Output Level -
sets the minimum level of the dimming output.
• Enter Smart Click configuration mode and click the switch ON or OFF until
the light is blinking ten times.
• Press ON for 3 seconds. Default setting is 0%. Adjust the min. light level to
the brightness level desired by clicking ON to increase and OFF to decrease
in 2% increments.
• To continue with configuration, press ON for 3 seconds, the light will
resume blinking ten times.
This concludes the configuration directions for the ERDRC controller.
Echoflex Solutions, Inc.
#1, 38924 Queens Way | Squamish | BC | Canada | V8B 0K8
Toll Free: 888-324-6359 | Phone: (778) 733-0111 | Fax: (604) 815-0078
Email: [email protected] | www.echoflexsolutions.com
echo
flex
Powered by ETC
© 2010-2016 Echoflex Solutions, Inc. | Specifications subject to change without notice.
Part # 8DC-5012 | Revision 2.2| 8189M21-5012-1 | Rev C
Listings
CEC
Title 24 compliant
ETL
Listed Component
Conforms to UL Standard 508
Certified to
CAN/CSA Std C22.2 No.14
UL 2043 Plenum rated
Only applies to models with 315MHz radios.
Contains FCC ID: SZV-TCM320C
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(I.) this device may not cause harmful interference and
(ii.) this device must accept any interference received,including
interference that may cause undesired operation.
Contains IC: 5713A-TCM320C
