![background image](http://html.mh-extra.com/html/echo/dlm-310-35p/dlm-310-35p_operators-manual_532385007.webp)
Symbol
Explanation
Remove the battery pack before the
maintenance operatons.
Li-ion battery
4
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL
MEANING
DANGER
Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING
Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.
IMPORTANT
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
NOTE
Added to give more informa-
tion.
5
RECYCLE
Separate collection. You must not discard
with usual household waste. If it is necessa-
ry to replace the machine, or if it is no more
use to you, do not discard it with household
waste.
Separate collection of used machine and
packaging let you recycle materials and use
them again. Use of the recycled materials
helps prevent environmental pollution and
decreases the requirements for raw materi-
als.
At the end of their useful life, discard batter-
ies with a precaution for our environment.
The battery contains material that is danger-
ous to you and the environment. You must
remove and discard these materials separate-
ly at a location that accepts lithium-ion bat-
teries.
6
INSTALLATION
WARNING
Do not use accessories that are not recommended by the
manufacturer.
WARNING
Do not put in the safety key or the battery pack until you
finalised the assembly of all the parts.
6.1
UNPACK THE MACHINE
WARNING
Read the operator's manual carefully to ensure that you
assemble the product correctly. Using a product that has
been incorrectly assembled could lead to an accident or
serious injury.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact your dealer.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
6.2
UNFOLD AND ADJUST THE
LOWER HANDLE
Figure 2.
1. Pull up and back the lower handle to lift the handle into
operation position. Make sure that the handles click into
position correctly.
2. Tighten the lower handle with the quick-release levers on
the two sides.
NOTE
Make sure that the two handles are in the same position.
WARNING
Do not damage the cables when you fold or unfold the
handle.
6.3
INSTALL THE UPPER HANDLE
Figure 3.
1. Align the holes in the upper handle and the lower handle.
7
EN
English Original Instructions