English
English
18
Display brightness in standby mode
When the radio is in standby mode, the display brightness can be adjusted manually by turning the Tune knob
or pressing the
v
/
V
buttons on the remote control. If no action is taken within 20 seconds, the brightness
value set in the Configuration menu will be restored.
EQ
You can set the equalizer for different music genres.
Buffer time
Internet radio may sometimes play unevenly. This can happen if the internet connection is slow or the network
is overloaded. To improve playback, you can set a longer buffer to preload a few more seconds of the radio
stream before starting playback.
The default value is 2 seconds. If you prefer a longer buffer, you can select 5 seconds.
AUX-IN amplification
If the volume level of the connected auxiliary device is too low even with the maximum volume setting on the
device, you can adjust the gain to 6 dB to achieve a higher volume level.
Cooking timer
Timer setting.
•
Volume: used to adjust the volume of the signal
•
Duration: Used to set the duration of the audio signal when not terminated manually. After the set time
has elapsed, the audio signal will automatically stop.
Reset CD tray
Manually ejects the CD from the drive.
Information
View network and radio system information.
You can use your computer to manage My Favourites and control the radio volume. Enter the IP address
(found in Configuration > Information > Network Information > IP) into the PC browser and make the
required changes to My Favourites on the screen that appears. The radio and PC must be connected to the
same WiFi network.
Software update
From time to time, software may be released to update the radio’s features. Check for updates regularly to keep
your radio up to date with the latest software.
Reset to default
By resetting, you can clear all settings and return to factory defaults.
Note: The reset clears all station presets, settings and configuration items.
