Ecco DuoBeam, Инструкция по установке и эксплуатации

Страница: 6 / 12

Page 6 of 12
FIGURE 5
IF Series Flash Pattern Selection
PriZm
™
Flash Patterns
Order Flash Pattern
1 Cycle Flash (Default)
2 NFPA Quad Flash 80 FPM
3 Steady Burn
4 Single Flash 75 FPM
5 Single Flash 150 FPM
6 Single Flash 300 FPM
7 Double Flash 75 FPM
8 Double Flash 150 FPM
9 Triple Pop Flash 75 FPM
10 Triple Flash 150 FPM
11 Quad Pop Flash 75 FPM
12 Quad Pop Flash 150 FPM
13 Five Flash 70 FPM
14 Five Flash 150 FPM
15 Modular Flash
The DuoBeam can be populated with one of two different module types - PriZm™ or Torus™. For PriZm™ (8 or 12 LED) style modules, the
flash pattern on each individual module can be cycled to the next flash pattern (shown in TABLE 1) by briefly shorting together the 2 short
pads with a wire or the blade of a screwdriver as shown in FIGURE 5. The modules can be reset to the default flash pattern by shorting the
pads together for longer than 5 seconds. A thin layer of conformal coat may need to be scraped from the surface of the short pads if the
modules aren’t changing patterns easily.
TABLE 1
SHORT PADS