ECCO STOVE E678 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 27

ECCO STOVE E678 Скачать руководство пользователя страница 5

5

|

P a g e

E850 E678 Instructions |

current as of May 2015 | Version 3

All information supplied by

Ecco Stove

®

is a trade mark of Landy Vent UK Limited copyright©EccoStove2015

Ecco Stove

| Foster House

 

| 2 Redditch Road,

 

Studley,

 

B80 7AX, United Kingdom

T

| +44 (0)1527 857 814

E

| [email protected]

W

| www.eccostove.com

Patent pending USA, Canada, Europe & Russia | UK Patent nos: 2467433 & 2498883

6. CLEAR GLASS OPERATION



Blackening of the door glass results from poor quality fuel (unseasoned wood) and initial firing
until the stove has reached its optimum working temperature.



Chimney draft, if less than 0.06 inches water gauge will impair the stove performance and hence
its capability to keep the door glass clean. Your installer will check this for you.



The whole stove body should be a minimum of 150°C to enable the air wash to operate
satisfactorily on the inside of the glass face. (200°C is the optimum operating temperature).



Do not load logs with the end grain pointing toward the glass as this will result in excessive glass
blackening. Always arrange the logs in a wigwam fashion within the firebox.

We cannot

guarantee that the stove glass will not blacken but correct usage of fuels and operating
temperatures will usually clean the glass throughout the burn.

7. AIRATED BACK PLATES

The back panels (pre-drilled vermiculite

and ceramic coated panels at the rear of the stove) are

consumables and will deteriorate in use. The panels are not covered by the manufacturer’s warranty

.

Damage can be caused by excessive firing but more usually by logs being smashed against them when
loading stove. Loading must be carried out with care.

8. ASH GRATE

The grate within your Ecco Stove is made from cast iron being a highly durable material providing ash is
not allowed to sit in the grate bars from the ash tray beneath.

Ash removal is recommended before the grate bars become flooded with ash. The grate is easily
removed by simply lifting it out through the opened glass door.

«
...
3
4
5
6
7
...
»

Содержание E678




























Отзывы:

Нет отзывов