background image

32

XRGI® 15 COMMISSIONING INSTRUCTION

VERSION 1.0 2019

 

Check that the setting on the flue gas pressure gauge is 

0.35 bar

.

 

Check that the flange and the pressure transmitter of the pressure switch are 
correctly fastened.

Torque:

Bolt 

- 10 Nm. +/- 5%

Pressure transmitter 

- 20 Nm. /+5%

5.2.3 

PA R A M E T E R   S E T T I N G

 

In the technician menu, move the cursor to 

Configuration

 by using the 

▲▼

 

buttons and press 

OK

 on the user interface.

M O D E M   S E T T I N G S

 

Move the cursor to 

Obtain an IP-addr. automatically

 by using the 

▲▼

 buttons 

and press 

OK

 on the user interface to activate the field.

 

Select 

Yes

 or 

No 

by using the 

▲▼

 buttons.

Yes:

 The IP address is obtained automatically.

Make sure the correct APN address is specified.
EC POWER Telia SIM card: 

internet.ts.m2m

No: 

The IP address must be entered manually.

When using another SIM card, contact the SIM card provider for the APN 
address.

Enter the APN address manually as follows:

 

Move the cursor to the address you want to change by using the 

▲▼

 buttons 

and press 

OK

 on the user interface.

 

Change the address by using the 

▲▼

 buttons and press 

ESC

 to save the entry.

 

Go to the next page by using the 

▲▼

 buttons.

X R G I ®   I D

 

Move the cursor to 

XRGI ID

 by using the 

▲▼

 buttons and press 

OK

 on the user 

interface to activate the field.

 

Enter the XRGI® ID of the XRGI® system by using the 

▲▼

 buttons and press 

ESC

 

to save the entry.

R E Q U E S T   C O N F I G U R AT I O N

 

Move the cursor to 

Manual configuration

 by using the 

▲▼

 buttons and press 

OK

 on the user interface.

An incorrect APN address causes data transfer problems.

TECHNICIAN MENU

1/1

 

IO status

 

Production

 

Heat pumps

 

Q-network statistics

 

Maintenance

 

Log

 

Configuration

MODEM SETTINGS

1/2

Obtain an IP-addr. automatically:

Obtain DNS-addr. automatically:

Subnet mask:

255.255.255.000

Yes

No

IP-address:

Default gateway:

000.000.000.000

000.000.000.000

REQUEST CONFIGURATION

2/2

XRGI ID:

Status:

Manual configuration

Request configuration:

1234567890

Waiting

Request

Manual

MODEM SETTINGS

1/2

Obtain an IP-addr. automatically:

Obtain DNS-addr. automatically:

APN-Address:

internet.ts.m2m

Yes

Yes

Содержание XRGI 6



















































Отзывы: