Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-Z5812SX User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
25
When the node is a terminal, the time functions are as follows:
If the node is a terminal, this parameter represents the heartbeat period of the terminal and the parent node. The faster the heartbeat
period, the faster the terminal switches the route to find the best parent node, and at the same time coordinates the heartbeat to detect
the online status of the terminal.
sleep_time:
Code
Target Heartbeat
period(Seconds)
1
3
10
40
20
80
30
160
40
320
50
640
60
1280
Note: If the nodes are coordinators and routers, this parameter is invalid.
6.6.15 Save Time for Parent Node
Time: The parent node saves the data of its child nodes for 30 seconds. If a terminal node needs to receive data from the parent node,
the sleep time configuration cannot be longer than 30 seconds.
Note: This parameter is the parameter of the parent node (router and coordinator), temporarily saves the data buffered and sent to the
sleeping node. The parent node (router and coordinator) is E180-ZG120A/B product
6.6.16 Rejoin Period for Nodes
Command format for Read:
Command Format
Command Example
Send: FE 01 29 FF
Reply: FB 29 net_rejoinperiod
Send: FE 01 29 FF
Reply: FB 29 05
Command format for Configuration:
Command Format
Command Example
Send: FD 01 29 time FF
Reply: FA 29
Send: FD 01 29 05 FF
Reply: FA 29
Rejoin period:
(1
～
254) The range of reconnection period is 1
～
254. The unit is minute. The default is 1 minute.
When the node is powered on, it will join the network (if there is no network status) or restore the network (if there is no network
status) or restore the network (if there is no parent node status). When the node is running, it will rejoin the network after the
parent node is offline. even. When the parameter is 254, it means that no reconnection or periodic screening will be performed.
