Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-Z5812SX User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
13
address
changed by the user (re-entry to the network)
Destination
MAC address
Read/
write
64bitMAC
In fixed-point mode, use long address to send
Equipment
type
Read/
write
E
、
S
They are: non-sleeping terminal, dormant terminal.
channel
Read/
write
CH11
～
26
The physical channel where ZIGBEE works.
Send mode
Read/
write
0
、
1
、
2
、
3
、
4
、
5
The transmission modes of the configuration module are: broadcast mode,
multicast mode, short address on demand mode, long address on demand
mode, protocol on demand, and protocol multicast. For details, please see
the corresponding mode function introduction.
Output mode
Read/
write
0
、
1
、
2
、
3
、
4
、
5
Configure the data output mode of the module, respectively:
Transmit
power
Read/
write
-37dbm
～
7dbm
Penetrate.
Remote
configuration
ID
Read/
write
2 bytes
Data + short address.
Local
network
group number
Read/
write
1
～
254
Data + long address.
Target
network
group number
Read/
write
1
～
254
Data + RSSI;
Wake-up
period (sleep
time)
Read/
write
0
～
2010
seconds
Data + short a RSSI.
Lost parent
node
reconnection
period
Read/
write
1
～
254
minutes
Data + long a RSSI.
Maximum
number of
reconnections
Read/
write
1
～
254 times
The output power of the module has high requirements for power
consumption. When the distance is not required, the transmission power
can be reduced to save average power consumption.
IO status
Read/
write
High/low
Used to determine whether the data received over the air is a remote
configuration command. Customers can change the unlimited
configuration ID according to their needs. The default is A8 8A.
PWM
Read/
write
1us
～
340ms
Used to configure the group number of the device in the network.
ADC value
read
0
～
3300mv
It is used to configure the group number of the corresponding target when
the device is multicast.
