Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-Z5812SX User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
30
6.6.23 Read all network parameters
Command format for Read:
Send: FE 2F FE FF
Reply: FB FE all_info
Send: FE 2F FE FF
Reply: FB FE 03 02 FE 5B
F6 FA 1F 1C 21 FE FF 57
B4 14 00 00 0C 46 0C FE
FF 9F FD 90 01 0B 0A 09
54 00 00 00 0A 1C 21 FE FF
57 B4 14 02 00 FF 05 05 A8
8A
all_info:FB FE 03 02 FE 5B F6 FA 1F 1C 21 FE FF 57 B4 14 00 00 0C 46 0C FE FF 9F FD 90 01 0B 0A 09 54 00 00 00 0A 1C
21 FE FF 57 B4 14 02 00 FF 05 05 A8 8A
Node type 03. Network status 02. Network short address FE 5B. Local network short address F6 FA. Local MAC address 1F 1C
21 FE FF 57 B4 14. Parent node network short address 00 00. Parent node MAC address 0C 46 0C FE FF 9F FD 90. Network group
number 01. Channel 0B. Transmit power 0A. Baud rate 09. Sleep time 54. Target network short address 00 00. Target network group
number 00. Target long address 0A 1C 21 FE FF 57 B4 14 System sending mode 02. Data output method 00. Network open time FF
(the coordinator is valid and this module does not support). Rejoin cycle 05. Rejoin times 05. Wireless ID A8 8A.
6.6.24 In the wireless receiving state, AUX wakes up the external MCU serial
port to delay printing time
Command format for Read:
Command Format
Command Example
Send: FE 01 35 FF
Reply: FB 35 AUX_delaytime
Send: FE 01 35 FF
Reply: FB 35 04
Command format for Configuration:
Command Format
Command Example
Send: FD 01 35 AUX_delaytime FF
Reply: FA 35
Send: FD 01 35 04 FF
Reply: FA 35
AUX_delaytime :1
～
255 The unit is ms, and the default parameter is 4ms, that is, after the module receives wireless data, it first pulls
down the AUX pin to wake up the external MCU, and then delays 4ms to output the serial port data to the external MCU.
