Ebyte E104-BT11, Руководство пользователя

Страница: 14 / 30

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT11 User Manual
Copyright ©2012–2020
，
Chengdu Ebyte Electronic Technology Co.,Ltd
13
of Ebyte.
Length
（
1 byte HEX
）
Payload (N byte HEX)
N
Parameter configuration
Transparent transmission
5.4.1 Parameter configuration
The configuration data is used to read and write various parameter information of the module and the network access operation
of the device. The format is as follows
Instruction
（
1 byte
）
Operation code
（
1 byte
）
Data
（
N byte
）
TX 0xC0 0~255 request data
RX 0x40 0~255 response data
Note: The correct configuration operation will get the corresponding response data. If the configuration is incorrect, the error
code will be returned as follows
Error code Description
0xFF Invalid parameter
0xFE Operation busy
0xFD Invalid command
0xFC No network equipment
0xFB Failed to get parameters
0xFA Failed to assign netkey
0xF9 Binding Appkey timeout
0xF8 Failed to bind Appkey
0XF7 The last networking is not over
0x01 No network created (no NETKEY)
0x02 No group created (no APPKEY)
0x03 This operation cannot be performed in the current state
0x04 PB-ADV configuration error
0x05 PB-GATT configuration error
0x06 Startup configuration error
0x07
0x08
0x09
0x0a
0x0b
0x0c
5.4.1.1 NetKey configuration
Network key for the network ID assigned by the provisioner in the process, in the following format.