Ebyte E104-BT11, Руководство пользователя

Страница: 15 / 30

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT11 User Manual
Copyright ©2012–2020
，
Chengdu Ebyte Electronic Technology Co.,Ltd
14
Operation
code
Parameter
Request 0x00 Configure 16 byte of NetKey data
Response 0x00 Return 16 byte of configured NetKey data
For example,
Request 12 C0 00 11223344556677889900112233445566
Response 12 40 00 11223344556677889900112233445566
Remark
1. This directive only applies to BT11-G;
2. The instruction does not support repeated settings;
3. Effective immediately, save after power off.
5.4.1.2 Read NetKey
Operation
code
Parameter
Request 0x01 N/A
Response 0x01 Return 16 byte of configured NetKey data
For example,
Request 02 C0 01
Response
12 40 01 11223344556677889900112233445566
Remark
1. This command reads the NetKey that has been set;
2. This instruction is only for BT11-G.
5.4.1.3 AppKey configuration
Operation
code
Parameter
Request 0x02 Configure 16 byte of AppKey data
Response 0x02 Return 16 byte of configured AppKey data
For example,
Request
12 C0 02 11223344556677889900112233445566
Response 12 40 02 11223344556677889900112233445566
Remark
1. This directive only applies to BT11-G;
2. This command can only be used after adding Netkey, and only supports configuring one APPkey.
5.4.1.4 AppKey read
Operation
code
Parameter
Request 0x03 Configure 16 byte of AppKey data
Response 0x03 Return 16 byte of configured AppKey data
For example,
Request 02 C0 03
Response 12 40 03 11223344556677889900112233445566
Remark
1. This directive is only applicable to BT11-G;
2. This command reads the AppKey that has been set.