39
Fix the internal wall mounting part (4i) to the wall and make the electrical connections as described in the next
paragraphs.
2a) EBERG REQU VERSION
DIRECT CONNECTION
Before proceeding with the connection, make sure that the wires are (live and neutral) inside the area specifically
obtained on the wall.
Take the internal wall-mounting part (4i) and the tools necessary to
connect the main supply to the terminal box.
Connect properly and safely the Live wires to the terminal block
identified as “N” and “L”.
REMOTE WALL CONTROL CONNECTION
Moreover it is possible to move the “ON/OFF” and the “SPEED SELECTION” switches on the wall.
Follow the
instructions of the paragraph “ DIRECT CONNECTION” related to the procedure of the connection to the electrical
supply.
To control the product by recessed switches it is necessary that, during the operation on the product, the
switches are always set up on 1 as shown in the picture (Y).
To turn on the product through a wall control, connect a bipolar switch in series to the “L” and “N” supply as
shown in the pictures (a) for bipolar switch
.
