29
INTRODUCTION
This manual includes technical descriptions, installation instructions, assembly, maintenance and technical data
exclusively directed to qualified personnel involved in the installation and maintenance of the product.
INTENDED USE
The product has been made and it is installed to allow a constant air exchange inside the room. The recovery
system can be generally installed in residential or public places.
The product is supplied with a ceramic heat exchanger that accumulates heat during the extraction of hot air
coming from the room while, during the air intake from the outside, the device transfers to the inlet cold air, the
thermal energy stored in the heat exchanger.
The product is designed for wall installation. The duct containing the heat exchanger is supplied for walls with a
maximum thickness of 400mm; the duct can be shorten to a minimum of 250mm.
The extracted or incoming air must not contain inflammable or explosive mixtures, chemical vapours, dusts, oils
and other pathogenic substances in general.
GENERAL INFORMATION
This product has been manufactured following current technical safety regulations and in compliance with EU
standards and is intended to provide an air exchange in rooms and enclosed spaces, wherever the product is
installed.
Please read this instruction carefully before installing or starting up the product. It contains important
information on personal and user safety rules to be followed while installing, using and carrying out
maintenance work on the equipment.
Once the product has been installed, please hand in this booklet to the end user.
Check that the appliance is in perfect condition while unpacking. Any fault or damage caused in origin is
covered by the our company guarantee.
Please make sure that the appliance coincides with the product you have ordered and that the details on the
instructions plate fulfill your necessities
Please follow all these indications to ensure performance, mechanical and electrical reliability and keep always
this instruction manual. Do not use this product for applications other then those indicated by the
manufacturer.
