manualshive.com logo in svg

EAW JF NT SERIES, Руководство пользователя

Поделиться
Скачать
EAW JF NT SERIES Скачать руководство пользователя страница 26

4. 

Turn the mounting screw clockwise, pushing against 
the loudspeaker and forcing the amplifier’s corner out. 
If the amplifier remains fixed to the gasket it may be 
necessary to jack another corner away from 
the loudspeaker. 

5

Once free, carefully lift the amplifier from the loudspeaker 
and disconnect the electrical leads at the coupling. Set the 
old amplifier module aside.

6. 

Connect the electrical leads to the replacement module. 

7. 

Install the amplifier module by reinstalling and tightening 
the 12 long mounting screws.

Note that the amplifier module can only be installed in one orientation. If the new amplifier
module does not easily fit in the cabinet, rotate the amplifier module.

8.5.3     REPLACING THE KF200

NT

AMPLIFIER MODULE

To remove the amplifier module from the loudspeaker:

1.   Remove the 6 mounting screws. Notice there are no corner jack 

screws.

2. 

Pull the amplifier free from the cabinet. 

3.

Once free, carefully lift the amplifier from the loudspeaker and 
disconnect the electrical leads at the coupling. Set the old 
amplifier module aside.

4. 

Connect the electrical leads to the replacement module. 

5. 

Install the amplifier module by reinstalling and tightening 
the 6 mounting screws.

Note that the amplifier module can only be installed in one orientation. If the new amplifier
module does not easily fit in the cabinet, rotate the amplifier module.

ELECTRICAL LEAD

COUPLING

26

Содержание JF NT SERIES





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды