5.3.1 VERTICAL ARRAY
1. Orient the enclosures so the LF drivers are adjacent (i.e., enclosure
bottom to bottom).
2. Use a 45° splay between the enclosure "bottoms."
3. Set the MODE switch for each loudspeaker to COUPLED.
5.3.2 HORIZONTAL ARRAY
Enclosures Vertical
1. JF26
NT
and JF56
NT
: use a 60° splay between the enclosure sides.
2. JF29
NT
and JF59
NT
: use a 90° splay between the enclosure sides.
3. Set the MODE switch for each loudspeaker to COUPLED.
Enclosures Horizontal
1. Orient the enclosures so the LF drivers are adjacent
(i.e., enclosure bottom to bottom).
2. Use a 45° splay between the enclosure "bottoms."
3. Set the MODE switch for each
loudspeaker to COUPLED
.
Support the weight of each
loudspeaker independently using
the optional fly track accessory.
5 . 4
S o f t w a r e P r o g r a m
5.4.1
EAWPILOT
EAWPilot is software for controlling the digital signal processing (DSP) for multiple EAW
products. Use the EAWPilot to apply user-adjustable signal processing to the overall array. The
interface provides standard DSP functions, including parametric equalization, high/low
shelving, low- and high-pass filtering, level, and signal delay.
5.4.2
COMPUTER REQUIREMENTS
EAWPilot requires an IBM compatible PC with the Windows® 98, Windows® 98SE,
Windows® 2000, Windows® ME, Windows® XP, and Windows JFNT® and Vista® operating
systems. It is not designed to work with Windows® 3.x, Windows® 95, or Macintosh®
operating systems.
Section 6 Electrical Installation
For the instructions in this section, refer to figures on pages 7 & 8.
6 . 1
I n p u t C o n n e c t i o n s
6.1.1
ANALOG SIGNAL INPUT CONNECTION
The two XLR-type input connectors on the rear of each JF
NT
/KF
NT
, one female and one male, are designed for
professional audio signal levels, nominally 0 dBu (= 0.775 V). Normally, use the female XLR as the signal input.
Use the male XLR as a loop-thru output to connect the same signal input to additional JF
NT
/KF
NT
s.
To use these connectors for analog audio input signals, repeatedly press the associated momentary INPUT
SELECT switch, cycling through the LED indications until only the NORM/ANALOG LED is illuminated.
12
