manualshive.com logo in svg

Eaton xStorage Compact 20 kW, Руководство по установке, Страница: 26 / 54

Поделиться
Скачать
Eaton xStorage Compact 20 kW Скачать руководство пользователя страница 26

EATON XSTORAGE COMPACT INSTALLATION MANUAL

 

P-16400097 - September 2020     www.eaton.com 

26

CAUTION

Make sure that each battery pack in a string and parallel connected strings are all of 

the same battery technology generation. Mixing different generation battery packs 

can result in malfunctioning and damage to the system.

NOTE: During battery pack installation or replacement, make sure that you write down all battery pack 

serial numbers and information for traceability reasons.

NOTE: During battery pack installation, mark the battery type to the label on the battery compartment. 

DANGER

The battery packs carry high AC or DC voltages. Handle with care.

To install the battery packs:
1.  Attach mounting brackets to the sides of the battery packs.

2.  Start from the bottom and slide in the battery pack from the front of the unit on the supports 

(shelves).

3.  Fasten each battery pack securely to the frame (hardware provided).

Содержание xStorage Compact 20 kW























































Отзывы:

Нет отзывов