EATON XSTORAGE COMPACT INSTALLATION MANUAL
P-16400097 - September 2020 www.eaton.com
21
4.3
Unpack the xStorage Compact system
These instructions apply for both the xStorage Compact system and the external battery pack.
Before you start to unpack and unload the battery packs and ESS units, make sure that the equipment
has been correctly transported.
The package is equipped with the TipNTell/DropNTell indicator on the package surface (see step 2
below). If the indicator arrow has turned all blue, contact the appropriate parties to report inappropriate
transportation.
WARNING
The equipment is heavy. If the unpacking instructions are not closely followed, the
racks may tip over and cause serious injury.
Do not tilt the racks more than 10 degrees from the vertical or the rack can tip over.
For transportation purposes, the equipment is bolted onto a wooden pallet. To remove the pallet and
install the equipment to the final installation location, do the following procedure:
1.
Before you unload the unit from the pallet, use a forklift or other material handling equipment to
move the unit to the installation area.
Insert the forks of the forklift between the skids on the bottom of the unit.
2. Make a visual inspection and make sure that there are no signs of shipping damage. Examine the
indicators. See the instructions next to the indicators on the package.