Eaton XP-503, Руководство пользователя

Страница: 31 / 70

5 Commissioning and operation
5.1 Adding expansions to the XP-503
XP-503
12/2014 MN048014-EN www.eaton.com
31
5 Commissioning and operation
5.1 Adding expansions to the XP-503
5.1.1 General prerequisites
Limitation of Liability
All technical data, certifications, and approvals will cease to apply/be void if expansions other than
those approved by Eaton are used.
We will not assume liability for functional limitations resulting from the use of non-Eaton devices and
components.
CAUTION
All cards and assembly parts are electrostatic-sensitive.
Follow all ESD safety instructions.
The symbol to the left is used to indicate the use of electrostatic-sensitive
components.
Precautions
CAUTION
Note:
Electronic assembly parts are extremely sensitive to electrostatic discharges.
Because of this, it is necessary to take precautions whenever handling the cards.
Please refer to the guidelines for electrostatic-sensitive components for more
information (ESD guidelines).

Before plugging in or disconnecting components or expansion modules,
disconnect the XP-503 from the power supply.

Before plugging in the cables, you will need to bring the static charge on your body
to the same potential as the charge on the XP-503 and the cables.
To do this, briefly touch the metal housing.

Discharge the electrostatic charge on your tools.

Wear an anti-static wrist strap when handling components.

Leave components and expansion modules in their packaging until
right before you install them.

Grab components and expansion modules from the edge only –
do not touch connection pins or traces.

Never run the XP-503 with the housing open.
CAUTION
Please note:
Only service personnel should be allowed to open the XP-503.