Eaton XP-503, Руководство пользователя

Страница: 16 / 70

3 Safety instructions
3.4 Device-specific hazards
16
XP-503
12/2014 MN048014-EN www.eaton.com
CAUTION
Electrostatic discharge
Electrostatic discharges may damage or ruin assembly parts.

Do not touch components (e.g., pins) that are electrostatic-sensitive.

Discharge any static electricity from your body before touching the device
(e.g., by touching an earthed metal object).
CAUTION
Non-galvanically isolated interfaces
The device may be damaged by potential differences.

The GND connections of all bus stations must be connected.
CAUTION
Data loss
If an SSD, HD, or CFast card is being written to and a voltage drop occurs or the
drive/card is removed, data may be lost or the SSD, HD, or CFast card may be
ruined.

Insert SSDs, HDs, and CFast cards only when the device is de-energized.

Avoid writing to SSDs, HDs, and CFast cards as much as possible. Reasons:
- The number of write cycles for SSDs, HDs, and CFast cards is limited.
- If there is a voltage drop while a write operation is in progress, data loss
is highly likely to occur.

Remove SSDs, HDs, and CFast cards only when the device is de-energized.

Before switching off the device, make sure that there are no programs writing to
an SSD, HD, or CFast card.
CAUTION
Condensation in/on the device
If the device is or has been exposed to climatic fluctuations (temperature
fluctuations, air humidity), condensation may form on or inside the device, creating a
short-circuit hazard.

Do not switch on the device if there is condensation in or on it.

If the device has condensation in or on it, or if the device has been exposed to
temperature fluctuations, let the device settle into the existing ambient
temperature before switching it on (do not expose the device to direct heat
radiation from heating appliances).