Eaton SystemStak DGM-5-30 Series Скачать руководство пользователя

Страница: 2 / 42

EATON

DGM**-5 30 Design E-VLST-BB002-E April 2015

N-2

SystemStak

™

Valves

ISO4401 Size 05

General Description

Eaton SystemStak

valves make compact hydraulic systems

in which modular valves are “sandwich” mounted between a

directional valve and a standard mounting surface. Compact

design improves system response by elimination of external

fluid conductors, thereby resulting in elimination of resonant

sounds which are noisy and lead to leakage. The design

of these valves is well proven and offers opportunities for

achieving small control assemblies, especially when the

valves are used with multi-station manifolds.
Mounting surface is available for interfacing with directional

valves and is coded “5” in the model numbers of Eaton

SystemStak valves. The “5 interface accepts Eaton DG4S4

directional valves and other directional valves with a standard

ISO 4401-05, NFPA-D05, ANSI/B93.7M size D05 or CETOP-5

port pattern.
Each valve “stak” can be configured to provide the specific

combination of functions required to meet the

system’s needs.
SystemStak valves are divided into two groups:
1. Valves acting in the pressure and/or tank lines

(“P” and/or “T”)

DGMC

Relief valve

DGMDC

Direct check

DGMFN

Flow control

DGMR1

Sequence valve

DGMX2

Pressure reducing

The general rule for this group is that the DGMC relief valve

be placed nearest the subplate or manifold. The DGMDC

direct check valve should be placed nearest the directional

control valve.
The DGMR1 sequence valve should be the farthest valve

from the directional valve. The DGMR1 must be mounted

directly to a subplate or manifold with a drain port, to

externally drain the DGMR1 at the mounting face.
2. Valves acting in the service lines (“A” and/or “B”)

DGMC

Relief valve

DGMC2

Dual relief valve

DGMDC

Direct check

DGMPC

Pilot operated check

DGMFN

Flow control

DGMR

Counterbalance

The general rule for this group is that the DGMC system relief

valve be the farthest valve from the directional valve.
When using a DGMPC with a DGMFN (meter-out), the

DGMPC should be nearest the directional valve.

Features and Benefits

•

Reduced space requirements

Stackable SystemStak valves, used with ISO 4401-

05, CETOP 5 (NFPA-D05) directional controls, provide

compact cost-effective control of actuator direction,

speed and force.

•

Reduced installed cost

SystemStak valves eliminate all intervalve piping and

connections, thereby reducing the number of potential

leakage points. Installed cost is less than when using

conventional subplate- or line-mounted valves.

•

Versatile & easy to install

SystemStak valves have all the internal passages

necessary to serve the directional valve mounted above

them. Any directional valve with a standard ISO 4401-

05, NFPA-D05, ANSI/B93.7M size D05 or CETOP-5

port pattern can be used with ISO 4401-05 SystemStak

valves.

Eaton bolt-extender kits simplify valve installation by

permitting each valve body to be separately and quickly

installed, and correctly torqued down. The kits also

allow the directional valve to be removed for service or

replacement without disturbing the stack.

•

Rugged & reliable

Internal working parts are produced from hardened

steel, and reside in a continuous-cast ductile (spheroidal

graphite) iron body. Excellent reliability is ensured,

even in high pressure applications. Working parts are

serviceable without removing valves from the stack.

Содержание SystemStak DGM-5-30 Series











































Результаты поиска

Содержание SystemStak DGM-5-30 Series

Отзывы:

Похожие инструкции для SystemStak DGM-5-30 Series

Бренды по названию

Популярные бренды

Eaton SystemStak DGM-5-30 Series, Руководство пользователя

Результаты поиска

Содержание SystemStak DGM-5-30 Series

Отзывы:

Похожие инструкции для SystemStak DGM-5-30 Series

Бренды по названию

Популярные бренды