
16
4. Installation
4.2.2 Cable Management and Routing
This section will provide steps and options to route power, ethernet and fiber cables. There are three cable routing
options.
Option 1: Routing cables directly into each IT Rack enclosure from the top.
Route the cable(s) from the IT Enclosure through the brush strips into the cable plenums on the top of the enclosure
and out through the cable hood.
Option 2 (Raised-Floor Installations Only): Routing cables directly into each IT Rack enclosure
from the bottom of each rack.
Route the cable(s) from the IT enclosure through the brush strips on the bottom of the enclosure through the floor
plenum.