Eaton SC100, Руководство по эксплуатации

Страница: 15 / 86

SC100 Operation
Copyright © 2008-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-63C August 2011
9
Alarm Indicators
Visual indicators
Power on LED (green)
Minor Alarm LED (yellow)
Critical/Major Alarm LED (red)
???
The system value cannot be displayed because of a failed, disconnected or
unconfigured sensor.
Audible indicator

One beep – indicates an invalid key press

One beep every 2 seconds – Minor alarm is active

Continuous sound – Critical/Major alarm is active

Critical/Major alarms always override Minor alarms.
► To stop the audible indicator

Press any key

The audible indicator will restart at the next active alarm or alert message.
► To enable/disable the audible alarm indicator
Either:

Use the keypad to go to: Menu > Configuration > Audible Alarm.
Or:

In DCTools go to: Alarms > Alarm Configuration .

When Disabled, the audible indicator will still indicate an invalid key press.
SC100 Operation Using a PC/Laptop
DCTools is configuration software for editing a system controller's configuration file (on-line)
and monitoring the operation of Eaton's dc power systems. It is available free from
dcpower.eaton.com/downloads.
DCTools can be run on a PC/laptop connected to the SC100's RS232 port.

For remote PC/laptop connection details see Communications Options on page 48 .
Before you start you will need:

The latest version of DCTools available from: dcpower.eaton.com/downloads.

A PC/laptop with RS232 port and DB9 F/F Null-modem cable (RadioShack 55010600,
Jaycar WC7513, or similar. Cross-over connections: 5-5, 2-3, 3-2.)