Eaton SC100, Руководство по эксплуатации

Страница: 60 / 86

SC100 Handbook
54
Copyright © 2008-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-63C August 2011
► To clear or change a Write Access Password
1
Connect to the SC100 with DCTools (see details on page 48 ).
2
Go to Configuration > Communications
3
Type a new password into the Write Access Password field or leave the field blank for no
password control.
4
Click the Apply Changes button.
5
DCTools only: Type the old password.
► To clear a Write Access Password from the SC100
1
Use SC100 keypad to go to Menu > Configuration > Controller > Edit > Serial Port Access .
2
Select Clear .

The password is now permanently cleared. If required, reset the password with DCTools.