Eaton S090ST, Руководство пользователя

Страница: 32 / 63

31
ROTARY TOW BEHIND REV010322
Oil Separator
To avoid injury:
-
Make sure to stop the engine before changing the oil
separator cartridge.
- Let the engine cool down sufficiently, hot oil may lead to
injury.
-
Check that the air system is not under pressure
1. Replace the oil separator cartridge flush.
2. Untighten the 8 screws of the separator lid.
3. Remove the lid carefully as to not damage the components and
the dip tube attached to the cover.
4. Apply a thin layer of oil on the seals of the new cartridge.
5. Screw the 8 lid screws by hand and do not forget to fasten the air
filter bracket. When the lid comes into contact with the surface of the
gasket, tighten the screws with a torque wrench in order to avoid
damaging the seals of the cartridge.